Actiontec electronic Network Router 0530 0276 000 User Manual

Quick Start  
Quick Start  
V.92 PCI Pro Modem  
Continued...  
Installing the Hardware:  
Installing the Drivers:  
1. Turn off and unplug the computer and all peripherals. Open the computer case and dis-  
charge any static electricity by grounding yourself (touch the power supply, etc. or wear a  
grounding strap).  
Windows 98, Windows 2000, and Windows ME  
You must install the driver from the included CD-ROM before installing the hardware.  
Refer to the uninstall procedure if required to begin a clean installation process.  
2. Carefully insert and secure the modem into an open PCI slot and close the computer.  
1. Insert the Installation CD-ROM provided with the modem.  
2. Click Install in the dialog box to begin the installation process.  
3. Click OK to install the appropriate modem driver on your system.  
4. When the installation is complete, the dialog box will appear. Click Exit.  
5. Proceed to the hardware installation procedure.  
Windows NT 4.0  
1. Follow the hardware installation procedure first before continuing with the driver installation.  
2. Insert the Installation CD-ROM provided with the modem.  
3. Click Install in the dialog box to begin the installation process.  
4. Click OK to install the appropriate modem driver on your system.  
5. Click OK to restart your computer.  
3. Connect the modem Line input to an analog phone jack using an RJ-11 phone cable.  
Optionally connect a telephone to the Phone input on the modem card. Reconnect the periph-  
erals and start the computer.  
Uninstall Procedure:  
1. Insert the CD-ROM provided with the modem.  
2. Open the CD-ROM from the desktop and double-click the “LT Remove.exe” application.  
Windows XP  
1. Follow the hardware installation procedure first before continuing with the driver installation.  
2. Insert the Installation CD-ROM provided with the modem.  
3. Click Install in the dialog box to begin the installation process.  
4. Click OK to install the appropriate modem driver on your system.  
5. When the installation is complete, the dialog box will appear. Click Exit.  
For more detailed information on installation, the Modem-On-Hold feature, Bitware, and Adobe  
Acrobat 4.0 consult the User Guide included with the modem.  
0530-0276-000  
Actiontec Electronics, 760 N. Mary Avenue, Sunnyvale, Ca 94085  
Continued on reverse...  
719-884-8300  
-
 

3M Power Hammer 000 RPM 100 mm 4 in User Manual
Activision Video Games 47875769953 User Manual
ADC Video Game Keyboard 450428 User Manual
Airlink101 Network Router AP671W User Manual
AKG Acoustics Microphone C5900 User Manual
AMD Computer Hardware GA M61PM S2 User Manual
Avet Reels Fishing Equipment SX 6 4 User Manual
Axis Communications Security Camera Axis P3225 User Manual
Behringer Digital Camera BUC400 User Manual
Behringer Stereo Amplifier MINIAMP AMP800 User Manual